Article Number:
The AMW or AMWIR is a DC transducer with high isolation voltage. Linear, it transfers the input voltage at the output.
By default, the input signal is 0-60 mV or 0-10 V.
The output signal is by default 0-10 V, 2-10 V, 0-20 mA or 4-20 mA.
Other input- and output sizes according to customer specifications on request.
In contrast to the AMW the has AMWIR a saving overflow relay with potential free contact.
Technical Data:
Power supply:
230VAC 50/60Hz ca. 3VA alternative 24VDC ca. 150mA
Übertragungsgenauigkeit:
< 0,5% v.E. (by 25°C environment)
Output-signal:
max. 10VDC bzw. max. 20mA
Separation voltage in-/output:
>= 4kV
Separation voltage power supply / input / output:
>= 4kV
Switching capacity of relay:
250VAC 2A (4kV coil-contact)
Housing (WxHxD):
55 × 75,5 × 110mm for DIN-rail and ground mounting
