Article Number:
Compact Power
• 80V operating voltage
• 4A Phase current
This new driver for the upper power range offers high-tech on minimizsed space. 2-phase stepping motors can be run with up to 4 A bipolar. The integrated, powerful micro processor takes care about a user friendly drive with high flexibility.
Intelligent Controller
Online-operation is not only possible via the standard operation mode with signals pulse and direction but also possible with the fitted serial interface (either RS232 or RS485).
A 7-Segment-LED-Display informs the user about the status of the drive or the respond of the protection devices.
Reliability
Helpful are all in- and outputs of the driver which are galvanic isolated with opto-isolators from the operating power. The driver is short circuit proofed and protected against over voltage and under voltage.
High Resolution
Due to the micro step run the motor can work nearly vibrationfree with a resolution of 1.8° (full step) up to 0.225° (1/8 step).
Technical Data:
Power supply:
40 .. 80VDC for rated current 4A max. 90VDC
Inputs:
On optocoupler, typically 24V / 16mA
Motor current (Disabled)
step pulse
current reduction
Direction of rotation CW / CCW
Low Level: 0 … 2.5V
High Level: 11 … 30V
I min = 5mA
Output (ready (ready)):
Opto-isolated, max. 24V/10mA
Serial port:
RS232 or RS485 selectable via jumper
Drive:
Bipolar stepper motor driver for 2-phase stepper motors
Current / Phase:
4A / phase
Phase flow setting:
0.4 … 4A
Width of step pulse:
> 10 microseconds
Sleep current:
75% or 50% of the set phase current
(limited to 0.25 A minimum)
*Delay time: *
100 ms pulse to switch on after step resting flow
Programmable step angle:
1 / 1 – ½ – 1 / 4 – 1 / 8 set by DIP switch
Rotation:
Switching> 10 microseconds before step pulse
Maximum stepping rate:
50kHz
Display:
Status and error display with LED 7-segment display
Operating Temperature:
0 .. 55°C
Storage Temperature:
-40 .. + 125°C
Ventilation:
By natural convection
Dimensions (WxHxD):
103 × 166 × 35mm
Weight:
412g (without heat sink)
716g (with heatsink)